DISCOVER OUR RANGE

INDUSTRIAL LABELING SYSTEMS

CHOOSE EXACTLY WHAT YOU NEED

“Linear” labeling and marking systems that guarantee all the flexibility of the self-adhesive.

No glue to feed, heat, or clean.

And above all, extremely rapid “set ups”, without the need to replace mechanical parts (format changes), typical of rotary movements.

Different needs, different models to choose from: discover our range.

DISCOVER OUR RANGE

INDUSTRIAL LABELING SYSTEMS

CHOOSE EXACTLY WHAT YOU NEED

“Linear” labelling systems that guarantee all the flexibility of the self-adhesive.

No glue to feed, heat, or clean.

And above all, extremely rapid “set ups”, without the need to replace mechanical parts (format changes), typical of rotary movements.

Different needs, different models to choose from: discover our range.

Industrial labeling systems

Industrial labeling systems

LIGHT SERIES

Minimal footprint, maximum efficiency. All the reliability of the most advanced solutions, without compromising on quality.

Compact and simple industrial labeling systems that can be integrated into both automatic and offline production lines with manual loading and unloading.

Efficient, simple and reliable industrial systems: no compromise on quality.

Available with Iron and Stainless Steel finishes.

Possible applications with Light Labeling Systems for self-adhesive labels

arca-labeling-labeling-systems-600

HIGHTECH SERIES

  • Cabin protection shaped to allow easier monitoring of the remaining label roll.
  • The control panel is rotatable and can be turned towards either side of the system; it is accessible whether the guard is closed or open.
  • Worktops made of naturally anodized aluminum. Rust-resistant.
  • Stainless steel conveyors
  • IP54 electrical system cabinets.
  • Worktop height adjustable by 200mm using the system's feet.
  • Maximum accessibility right up to the centre of the conveyor, thanks to the limited width of the base (only 900mm).
  • Product handling devices also with servo motors.
  • One-Side adjustments that allow you to operate from just one side of the system.
  • Millimeter scales for precision positioning of labelers and product handling devices.

SKYTECH SERIES

The infinite variety of packages to be labeled, application sides, and plant layouts require modular solutions, of any size, specifically designed to meet the customer's needs.

  • Open frame and raised electrical cabinet for easier washing and cleaning.
  • Also in the Low Level version with a particularly low work surface, to allow for easier operation on lines that handle heavy products.
  • Sliding door enclosure (vertical opening) available for all Skytech systems (Side applications).
    For minimal space and to avoid obstructing access to the MMI even when the covers are open. Protects the system from dust and reduces noise pollution. The roll holder is accessible even when the covers are closed.

Possible applications with Hightech Series and Skytech Series self-adhesive labelling systems

SPECIALIZED SERIES

Specialized systems to best perform a specific task

  • FEEDER: system for self-adhesive labeling and/or coding of flat products: flat boxes (whether already glued or still “open”), telephone and credit cards, membership cards, sheets of paper, envelopes, clothing tags.  
  • STRIPED LINERLESS: eco-labeling system for skin packs, trays, and rectangular products. It can be applied to the top, sides, and bottom of the product.
  • TO CONVERT: system for top labeling of any flexible continuous web (film, labels, cardboard, etc.). The DP version is equipped with a TT desktop printer for customizing basic labels.

Pharma line

Self-adhesive labeling machines dedicated to the pharmaceutical industry for labeling, coding, tracking, and aggregating cases, vials, bottles, single-dose strips, and blow-fill seals.

Compact 5.0

Automatic industrial labeling system for wrap-around application on ampoules, vials, test tubes, syringes, single doses, blow fill seals and all cylindrical pharmaceutical products.

Arca designs a range of automatic labeling systems for wrap-around application on cylindrical pharmaceutical products that can be used both offline (even with the addition of a rotary table) and inline, connected to other packaging machines (e.g. filling machines), for applications ranging from 10 to 300 pieces per minute.

The labeling machine is part of the Arca Pharma line of labeling machines, a specific line designed and dedicated to the labeling, coding, traceability, and serialization of pharmaceutical products. It is therefore conceived to guarantee high standards of quality, safety, productivity, and accessibility required by the guidelines on good manufacturing practices for the pharmaceutical sector.

For product traceability, the labeling system can be integrated with an inkjet or laser marker designed by Arca. The laser marker guarantees significant advantages in terms of performance (non-stop solution), efficiency, and operating savings.

PHARMATRACK SEAL 4.0

Track & trace sealing and serialization

System for serializing and sealing formed pharmaceutical cartons. Allows marking (thermal inkjet or laser), optional labeling with a pharmaceutical seal, tamper-evident labeling, and optical inspection of all process phases. Compact "balcony" base made of AISI 304 stainless steel, with laminated glass protection.

Vision system monitor on ergonomic support accessible even when the guard is open.
The machine is controlled via a touchscreen graphical interface with advanced 4.0 functions (compliant with CFR 21 part 11) and biometric access control; password management compatible with Microsoft Active.

Positive transport system, using a phased inserter and a conveyor with two parallel belts equipped with pushers, ensures the carton is held correctly throughout the process and prevents slippage and product buildup. It guarantees the highest quality marking and labeling.

Validable rejector with a completely transparent collection container. Separates products that are not labeled or have an unreadable code or do not match the product you set.

PHARMASEAL 5.0

Burglar-proof seal

Automatic industrial pharmaceutical self-adhesive anti-counterfeit labeling system for the application of 2 seal labels on the side corners of formed cartons.

The labeler is very compact and easily integrates with existing labeling machinery for applications up to 200 pieces per minute.

The labeling machine is part of the Arca Pharma line of labeling machines: a specific line designed and dedicated to the labeling and coding of pharmaceutical products. It is therefore conceived to guarantee high standards of quality, safety, productivity, and accessibility required by the guidelines on good manufacturing practices for the pharmaceutical industry.

CARDBOARD

Industrial pharmaceutical system for the labeling and coding of flat pharmaceutical products such as flat cartons (whether already glued or still “open”).

The system supports labelers, printing units for labeling and printing products, and vision systems for reading and verifying data with the rejection of unsuitable products.

The labeling machine is part of the Arca Pharma line of labeling machines, a specific line designed and dedicated to the labeling, coding, traceability, and serialization of pharmaceutical products. It is therefore conceived to guarantee high standards of quality, safety, productivity, and accessibility required by the guidelines on good manufacturing practices for the pharmaceutical sector.

Industrial labeling systems - features

Open frame

The innovative structure of Arca systems. Bases made of square-section tubular steel, without panels. To exploit every centimeter of space, to see, clean and wash, to operate without impediments thanks to maximum accessibility. With ARCA CLIP, it's extremely easy to add or remove components and accessories, change labeling devices, and disassemble parts for repair or overhaul; without drilling or welding, with reduced intervention times and costs.

Crazy about steel

When designing labeling systems, bases, uprights, conveyors, and electrical system cabinets are constructed entirely of steel to ensure maximum strength. No vibration, no bending. Precise and indestructible systems, designed to last a lifetime. Bases are made of AISI304 stainless steel with a micro-shot peened STEEL finish or of structural steel with a scratch-resistant IRON epoxy powder finish in metallic gray. Conveyors, panels, and electrical cabinets are made of AISI304 stainless steel with a satin finish.

One-sided adjustments

ONE-SIDE adjustment: allows you to operate a single handwheel from any side of the system. Format changes are quick and guided by numerical references. All adjustments are uniquely identified with alphanumeric codes, traceable to the "format change" tables.

Brushless motors

No mechanical handling; greater precision, less wear and noise. Product handling devices controlled by brushless motors; effective, practical, and safe:

  • Constant power torque at any speed
  • No oil leaks or leaks
  • Easily cleanable
  • Also suitable for high ambient temperatures (50°)
  • Longer average life and zero maintenance
  • They do not present any risk of burns (“cold” engines)

Excellent electrical systems

  • “Non-proprietary” electronic components; available “off the shelf”, anywhere in the world
  • Shielded electrical wires and metal cable glands with IP68 sealing grade
  • Power circuits protected by automatic switch with the possibility of shunting alarms
    (e.g. overloaded component)
  • Correctly sized, easily accessible (forced ventilation) containment cabinets
    and made of steel for protection from impacts and electromagnetic disturbances
  • Compliance with the Electromagnetic Compatibility (EMC 2014/30/EC) and Low Voltage (LVD 2014/35/EC) directives

Advanced logic

Intuitive interfaces with the most advanced functions:

  • SYNCROSPEED: the speeds of all product handling devices (spacers,
    orientors, upper and lateral stabilizers, rollers, adapters), are automatically synchronized to the “master” speed set for the conveyor
  • On-the-fly, instant and accurate adjustments
  • Alarm management is performed according to a "positive" logic. The detection of successful completion of all checks, rather than an anomaly, also guarantees against failure of the control device.
  • QUICK SETUP for quick start-up, using “product programs” that allow the
    storage and recall of data necessary for operation
  • Ethernet interface option for connection to the company operating system
    2014/35/EC)
  • Analogue controls (for simpler systems) are identified with clear and intuitive icons that overcome any language barrier
  • The most complete systems are equipped with MMI, a color touch screen. Compliant with the latest technology is also available upon request.
    CFR 21 Part 11 and complete with the most advanced features

Safety for operators

Safety for operators and maintenance workers:

  • In the labeling machines, the rotating discs and spindles have no holes or dangerous openings
  • Danger points are protected and any gaps are always less than 8 mm.
  • Thanks to the “localized protections”, the Arca systems guarantee the easiest operation.
  • Protective devices also safeguard the integrity of the system and products in the event of incorrect adjustments.

Attention to details

In the development of labeling systems, no detail is left to chance:

  • Product guides, made of scratch-resistant white polyzene, with high sliding properties
  • Spirit level for easier positioning of the system
  • Wires and cables are run inside the metal structure
  • Worktop adjustable in height during installation
  • Acoustic/visual alarms with LED lamps, for longer life and more intense colours.
    Color usage logic compliant with EN60204 standard

Industrial labeling systems - features

Open frame

The innovative structure of the Arca systems. Bases in square section tubular steel, without
Paneling. To make the most of every inch of space, to see, to clean and wash, to operate
without obstacles thanks to maximum accessibility. With ARCA CLIP it is very simple to add or
remove components and accessories, change labelling machines, dismantle parts to be repaired or overhauled;
without drilling, without welding, with limited intervention times and costs.

Crazy about steel

Bases, uprights, conveyors and cabinets of the electrical systems are entirely made of
steel to ensure maximum solidity. No vibration, no bending. Precise systems and
Indestructible, designed to last a lifetime. AISI304 stainless steel bases with STEEL finish.
micro-shot peened or in construction steel with scratch-resistant IRON epoxy powder finish
Metallic gray color. Conveyors, panels, and electrical cabinets in AISI304 stainless steel with a satin finish,

One-sided adjustments

ONE SIDE adjustment: allows you to act on just one handwheel and from any side of the system.
Format changes are quick and guided by numerical references. All adjustments are identified.
uniquely with alphanumeric acronyms, traceable to the “format change” tables.

Brushless motors

No mechanically derived movements; more precision, less wear and noise
Product handling devices controlled by brushless motors; effective, practical and safe:

  • Constant power torque at any speed
  • No oil leaks or leaks
  • Easily cleanable
  • Also suitable for high ambient temperatures (50°)
  • Longer average life and zero maintenance
  • They do not present any risk of burns (“cold” engines)

Excellent electrical systems

  • “Non-proprietary” electronic components; available “off the shelf”, anywhere in the world
  • Shielded electrical wires and metal cable glands with IP68 sealing grade
  • Power circuits protected by automatic switch with the possibility of shunting alarms
    (e.g. overloaded component)
  • Correctly sized, easily accessible (forced ventilation) containment cabinets
    and made of steel for protection from impacts and electromagnetic disturbances
  • Compliance with the Electromagnetic Compatibility (EMC 2014/30/EC) and Low Voltage (LVD 2014/35/EC) directives

Advanced logic

Intuitive interfaces with the most advanced functions:

  • SYNCROSPEED: the speeds of all product handling devices (spacers,
    orientors, upper and lateral stabilizers, rollers, adapters), are automatically synchronized to the “master” speed set for the conveyor
  • On-the-fly, instant and accurate adjustments
  • Alarm management is performed according to a "positive" logic. The detection of successful completion of all checks, rather than an anomaly, also guarantees against failure of the control device.
  • QUICK SETUP for quick start-up, using “product programs” that allow the
    storage and recall of data necessary for operation
  • Ethernet interface option for connection to the company operating system
    2014/35/EC)
  • Analogue controls (for simpler systems) are identified with clear and intuitive icons that overcome any language barrier
  • The most complete systems are equipped with MMI, a color touch screen. Compliant with the latest technology is also available upon request.
    CFR 21 Part 11 and complete with the most advanced features

Safety for operators

Safety for operators and maintenance workers:

  • In the labeling machines, the rotating discs and spindles have no holes or dangerous openings
  • Danger points are protected and any gaps are always less than 8 mm.
  • Thanks to the “localized protections”, the Arca systems guarantee the easiest operation.
  • Protective devices also safeguard the integrity of the system and products in the event of incorrect adjustments.

Attention to details

No detail is left to chance:

  • Product guides, made of scratch-resistant white polyzene, with high sliding properties
  • Spirit level for easier positioning of the system
  • Wires and cables are run inside the metal structure
  • Worktop adjustable in height during installation
  • Acoustic/visual alarms with LED lamps, for longer life and more intense colours.
    Color usage logic compliant with EN60204 standard

Global Service

Arca self-adhesive automatic labeling systems are equipped with all the following services:

  • Commissioning and user training courses anywhere in the world
  • Accurate instruction manuals, complete with electrical and pneumatic diagrams, exploded views and spare parts lists
  • Pre-Delivery Inspection and FAT/SAT validation procedures
  • 12-month warranty (extendable and possibly “on site”) also on electrical components
  • Periodic maintenance contracts
  • Technical interventions carried out by three assistance centers in Italy (with spare parts warehouse) in Milan, Rome and Padua
  • Distributors worldwide for local technical and sales support

Download the monographs

Download the monographs

Contact us for advice